General              GC-1002 achieves a good balance between therequirements oflow residual odor, low emission after cure and efficientpolymerization . Anadditional benefit is the minimal yellowing after cure.

Physical Properties               Appearance : slight yellow liquid

Meltingpoint : ca. -220°C

Density at 20oC: 1.216 g/cm3

Kinematic Viscosity at 20°C: 4.8 mm2/s

Application  Photocure GC-1002 is particularly recommended when excellent surface

                curing properties (stain resistance) and low colorproperties after cure

                and after aging are required.

                Possible applications for Photocure GC-1002 are:

                                ·  Floorcoatings

                                ·  Furniturecoatings

                                ·  Plasticand metal coatings

                                ·  UVcurable UV stabilized coatings

Recommended concentrations:

(concentrationsare based on weight percent binder solids)

Film thickness 5-20 mm       0.5 - 2 %   Photocure GC-200

Filmthickness 20-200 mm     1 - 4 %     Photocure GC-200